Framed units can offer a traditional or contemporary style for your handmade kitchen.  The doors sit inset into the frame with visible hinges.  Normally the frame will be 40mm wide at the top, bottom and each side.  Drawers and appliances will normally be separated by a 40mm separator although this is optional.

A number of options are shown below.  We can make most units at any width at no extra cost.  If you do not see a unit that you are looking for then we would be delighted to quote you for it.

Base units

Base units have a solid backing to them.  Where a significant amount of access to services is needed then the sink unit type may be more appropriate although the solid backing can be cut out for access to services.

Framed base unit, single door with a shelf. Left or right hinge.

Framed base unit, single door with shelf and hi-line drawer. Left or right hinge.

Framed base unit, double door with a shelf.

Framed base unit, double door with a shelf and two hi-line drawers.

Framed base unit, double door with a shelf and single hi-line drawer.

Framed base unit, triple drawer, quad door with a shelf.

Sink units

Sink units are the same as normal base units but the drawers are non-working false drawer fronts and we normally allow a 100mm service gap at the back.

If you would prefer a blanking plate on the inside of the cabinet to hide the sink then we can do that too!

Framed sink base unit with single door, shelf and hi-line fixed non-working drawer.

Framed sink base unit with double doors, shelf and two fixed non-working drawers.

Framed sink base unit with double doors, shelf and single fixed non-working drawer.

Framed low sink base unit with single door and shelf to cater for butler sink or similar.  Sink and tap not included.  This unit has integrated end panels and frames either side of the sink.  This helps support heavy worktops and also is an excellent choice when a dishwasher will be installed next to the sink.

Framed low sink base unit with single door and shelf to cater for butler sink or similar.  Sink and tap not included.  This unit has integrated end panels and frames either side of the sink.  This helps support heavy worktops and also is an excellent choice when a dishwasher will be installed next to the sink.

Drawer base units

Drawer base units provide excellent storage and we can make them in most configurations even if you do not see them in the following illustrations.  The drawer mechanisms are high quality, fully extending with a soft self-closing mechanism.

Base drawer unit with two deep pan drawers.

Base drawer unit with two deep pan drawers and a single drawer at the top.

Base drawer unit with three drawers of equal size.

Base drawer unit with single pan drawer at bottom with two drawers above.

Base drawer unit with four drawers of equal size.  This unit also looks nice without the 40mm frame separators.

If you have space for more drawers why not choose this 3-2-1 option.  We can also make other combinations like 3-2-2, 4-3-2, etc.

Corner base units

There are a number of options to ensure that tricky corners spaces are accessible.  Carousels and magic corners are available to be integrated into the corner cabinets to maximise valuable storage space.

Corner base unit with shelf and left hand door.  We can fit an optional magic corner or carousel to these units.

Corner base unit with shelf and right hand door.  We can fit an optional magic corner or carousel to these units.

L shaped base unit with shelf.  900mm x 900mm.  The doors are connected using a piano hinge.  Please state whether you want right or left hand opening. (Image does not show frame around doors and 50mm recess at back of the unit for services due to software limitations.)

We can fit an optional magic corner or carousel to these units.

Miscellaneous base units

Only a small selection of possible units are shown here.  If you have a particular requirement in mind then why not contact us for a quote?

Framed open base unit.  Ideal for trays and storage.

Framed base unit with two wicker baskets and single drawer above.  The wicker baskets are on wooden runners to increase accessibility.

Framed base unit with three wicker baskets. The wicker baskets are on wooden runners to increase accessibility.

Framed base unit with a pullout larder unit.  Pullouts of various sizes are available.  (Pullout not shown)

I-DW - Semi-integrated appliance housing including door only.  (No frame, no carcass and dishwasher not included!)

I - Integrated appliance housing including frame and door.  Frame and door are one piece.  (No carcass)

Y - Integrated appliance housing including door only.  (No frame and no carcass)

Integrated appliance housing including separate top frame, door and bottom frame.  Used in non-modular framed kitchens.  (No carcass)

Framed Wall units

Wall units can be any height, but small units are generally at 575mm high, medium are 720mm high and tall are 900mm high.  Wall units have a standard depth of 320mm including 20mm service gap and 20mm door/frame depth.  The wall units have hidden wall hangers that fit in the services gap.

Dresser units are designed to sit on the work surface and will have a depth of 320mm unless a greater depth is specified.

Framed wall unit with single door and two shelves.

Framed wall unit with double doors and two shelves.

Framed wall unit with glazed single door and shelves.  Glazed doors can be simple or panelled, leaded or even use stained glass.  Shelf/ves can also be glazed.  These cabinets can also have integrated lights.

Framed wall unit with double glazed doors and shelves.  Glazed doors can be simple or panelled, leaded or even use stained glass. Shelf/ves can also be glazed. These cabinets can also have integrated lights.

Framed open wall unit.

Framed wall unit with plate rack at bottom.

Framed corner wall unit with right hand opening door.

Framed corner wall unit with left hand opening door.

Framed L-shaped corner wall unit.  The doors are connected using a piano hinge.  Please state whether you want right or left hand opening.

Framed diagonal shaped corner wall unit.  Please state whether you want right or left hand opening.

Framed dresser unit (sits on worktop) with single door.  Can be supplied with or without the bottom frame (shown without).

Framed dresser unit (sits on worktop) with double doors.  Can be supplied with or without the bottom frame (shown without).  Without the bottom frame the worktop has to be installed first below the unit. Ideal if you want an appliance on the worktop which you can pull out to use then push back and hide away.

Framed dresser unit (sits on worktop) with single door and a drawer at the bottom.

Framed dresser unit (sits on worktop) with double doors and two drawers at the bottom. Can also be supplied with just one wide drawer at the bottom.

WA - Extractor housings can be made to different styles, sizes and configurations to match your kitchen and extractor design.

We can also make mantle surrounds to your design requirements.

Tall units

Tall units offer a stylish way of storing items and housing appliances.  The units here are just examples of some configurations, but we can build configurations to your specification.

Please note that because these units are framed, the appliance sits within the frame.  Usually the appliance will be 600mm wide and the frame 40mm wide each side making the total width of the unit 680mm.

Tall framed unit housing a single oven.  Storage with shelves and single doors left or right opening above and below. Top of the oven usually at 1650mm off the ground but can be varied.

Tall framed unit housing a double oven.  Storage with shelves and single doors left or right opening above and below. Top of the oven usually at 1650mm off the ground but can be varied.

Tall framed unit housing a single oven.  Two deep pan drawers below and storage with shelf and single door left or right opening above. Top of the oven usually at 1650mm off the ground but can be varied.

Tall framed unit housing a double oven.  Two deep pan drawers below and storage with shelf and single door left or right opening above. Top of the oven usually at 1650mm off the ground but can be varied.

Tall framed unit housing two single ovens.  Storage above and single drawer below (sometimes a warming drawer).

Tall framed unit housing single oven and microwave/steamer. Can swap microwave/steamer to top if desired. Top is a door and bottom a drawer (sometimes a warming drawer).

We can make any combination of oven, microwave, steamer, warming drawer tall stack of units.  Just let us know the appliances and we will get them fitted if technically feasible.

Tall framed larder unit either with a hinged door or with full height pullout unit.  There are lots of options for larder pullouts.

Tall framed unit housing integrated fridge.  Storage with lift-up door above.  We can also accommodate freezers, fridge freezers in 50/50, 70/30 or other formats.
 

Tall framed four door larder unit with plenty of shelving and double doors top and bottom.  We can also fit this unit out with internal drawers, storage racks, etc.

Tall framed larder unit with plenty of shelving and single doors top and bottom.  We also recommend the spice racks on the back of the door.

Tall framed larder unit with plenty of shelving and double doors.  Shelving can be reconfigured if required.

Mid-height units

The mid-height units can raise appliances to a more workable height without being as imposing as the tall units.  They look great with a length of worktop on top.

Please note that because these units are framed, the appliance sits within the frame.  Usually the appliance will be 600mm wide and the frame 40mm wide each side making the total width of the unit 680mm.

Mid-height unit with three drawers below a single oven.

Mid-height unit with right or left opening door below a single oven.

We can do other configurations of mid-height units.  Just ask us.