Plant-on (also known as lay-on) units have doors and drawer fronts that plant-on (rest on) the cabinet inside.  The doors are hinged using quality hidden hinges that self close and include a fully extending self and soft closing mechanism.

Base units

Base units have a solid backing to them.  Where a significant amount of access to services is needed then the sink unit type may be more appropriate although the solid backing can be cut out for access to services.

BY - Base unit, single door with a shelf. Left or right hinge.

BY1D - Base unit, single door with shelf and hi-line drawer. Left or right hinge.

BZ - Base unit, double door with a shelf.

BZ2D - Base unit, double door with a shelf and two hi-line drawers.

BZ1D - Base unit, double door with a shelf and single hi-line drawer.

Sink units

Sink units are the same as normal base units but the drawers are non-working false drawer fronts.  There is usually a 100mm service gap at the back of the sink units.

If you would prefer a blanking plate on the inside of the cabinet to hide the sink then we can do that too!

SY1D - Sink base unit with single door, shelf and hi-line fixed non-working drawer.

SZ2D - Sink base unit with double doors, shelf and two fixed non-working drawers.

SZ1D - Sink base unit with double doors, shelf and single fixed non-working drawer.

SZV - Low sink base unit with double doors and shelf to cater for butler sink or similar.  Sink and tap not included. Often will require end panel on side if there is an appliance on the side and/or if supporting heavy worksurface.

Drawer base units

Drawer base units are great for storage and we can make them in most configurations even if you do not see them here.  The drawer mechanisms are high quality, fully extending with a soft self-closing mechanism.

2P - Base drawer unit with two deep pan drawers.

2P1D - Base drawer unit with two deep pan drawers and a single drawer at the top.

3D - Base drawer unit with three drawers of equal size.

1P3D - Base drawer unit with single pan drawer at bottom with three drawers above.

4D - Base drawer unit with four drawers of equal size.

5D - Base drawer unit with five drawers of equal size.

Corner base units

There are a number of options to ensure that tricky corners spaces are accessible.  Carousels and magic corners are available to be integrated into the corner cabinets.

C-L - Corner base unit with shelf and left hand door.  (50mm recess at right hand side of unit). 50mm corner post also included to ensure adequate clearance to adjacent unit.

We can install an optional magic corner or carousel into these units.

C-R - Corner base unit with shelf and right hand door.  (50mm recess at left hand side of unit). 50mm corner post also included to ensure adequate clearance to adjacent unit.

We can install an optional magic corner or carousel into these units.

L - L shaped base unit with shelf.  900mm x 900mm.  The doors are connected using hidden hinges.  Please state whether you want right or left hand opening. (50mm recess at back of the unit for services not shown due to software limitations.)

We can install an optional carousel into these units.

L-Car - L shaped base unit with top and bottom chrome 3/4 carousel.  900mm x 900mm.  The doors are connected using hidden hinge.  Please state whether you want right or left hand opening. (50mm recess at back of the unit for services not shown due to software limitations.)

We can install an optional carousel into these units.

Miscellaneous base units

Only a small selection of possible units are shown here.  If you have a particular requirement in mind then why not contact us for a quote?

BO - Open base unit.  Ideal for trays and storage.

B2X1D - Base unit with two wicker baskets and single drawer above.  The wicker baskets are on wooden runners to increase accessibility.

B3X - Base unit with three wicker baskets. The wicker baskets are on wooden runners to increase accessibility.

BY + Pullout - Base unit with base mounted two tier pullout larder unit.  (Pullout not shown)

I-DW - Semi-integrated appliance housing including door only.  (No carcass and dishwasher not included!)

I - Integrated appliance housing including door only.  (No carcass)

Plant-on Wall units

Wall units can be any height, but small units are generally 575mm high, medium are 720mm high and tall are 900mm high.  Wall units have a standard depth of 320mm including 20mm service gap and 20mm door/frame depth.  The wall units have hidden wall hangers that fit in the services gap.

Dresser units are designed to sit on the work surface and will have a depth of 320mm unless a greater depth is specified.

WY - Wall unit with single door and two shelves.

WZ - Wall unit with double doors and two shelves.

Wy - Wall unit with glazed single door and shelves.  Glazed doors can be simple or panelled, leaded or even use stained glass. Shelf/ves are also glazed.  These cabinets can also have integrated lights.

Wz - Wall unit with double glazed doors and shelves.  Glazed doors can be simple or panelled, leaded or even use stained glass. Shelf/ves are also glazed.  These cabinets can also have integrated lights.

WO - Open wall unit.

WR - Wall unit with plate rack at bottom.

WC-R - Full height (720mm) corner wall unit with right hand opening door.  20mm recess for services.

WC-LF - Full height (720mm) corner wall unit with left hand opening door.  20mm recess for services.

WL - L-shaped corner wall unit.  The doors are connected using hidden hinges.  Please state whether you want right or left hand opening. (20mm recess at back of the unit for services.)

WC - Diagonal shaped corner wall unit.  Please state whether you want right or left hand opening. (20mm recess at back of the unit for services.)

KY - Dresser unit (sits on worktop) with single door and two shelves.

KZ - Dresser unit (sits on worktop) with double doors and two shelves.

K1DY - Dresser unit (sits on worktop) with single door, two shelves and a drawer at the bottom. (Note drawer is free running i.e. without runners).

K2DZ - Dresser unit (sits on worktop) with double doors, two shelves and two drawers at the bottom. (Note drawers are free running i.e. without runners).

WA - Extractor housings can be made to different styles, sizes and configurations to match your kitchen and extractor design.

We can also make mantle surrounds to your design requirements.

Tall units

Tall units offer a stylish way of storing items and housing appliances.  The units here are just examples of some configurations, but we can build configurations to your specification.

TYGY - Tall unit housing a single oven.  Storage with shelves and single doors left or right opening above and below. (Oven not included)

TYHY - Tall unit housing a double oven.  Storage with shelves and single doors left or right opening above and below. (Oven not included)

T2PGY - Tall unit housing a single oven.  Two deep pan drawers below and storage with shelf and single door left or right opening above. (Oven not included)

T2PHY - Tall unit housing a double oven.  Two deep pan drawers below and storage with shelf and single door left or right opening above. (Oven not included)

TYGGU - Tall unit housing two single ovens.  Storage with shelf and single door left or right opening below. Storage with lift-up door above. (Ovens not included)

TYGQU - Tall unit housing single oven and microwave.  Storage with shelf and single door left or right opening below. Storage with lift-up door above. (Oven and microwave not included)

T2PGQU - Tall unit housing single oven and microwave.  Two deep pan drawers below. Storage with lift-up door above. (Oven and microwave not included)

T1PHQU - Tall unit housing double oven and microwave.  Deep pan drawer below. Storage with lift-up door above. (Oven and microwave not included)

TEJU - Tall unit housing fridge above freezer.  Storage with lift-up door above. (Fridge and Freezer not included)
 

TZZ - Tall larder unit with plenty of shelving and double doors top and bottom.

TYY - Tall larder unit with plenty of shelving and single doors top and bottom.

TZ - Tall larder unit with plenty of shelving and double doors.  Shelving can be reconfigured if required.

TN - Tall larder unit with full height pullout unit.

Mid-height units

The mid-height units can raise appliances to a more workable height without being as imposing as the tall units.  They look great with a length of worktop on top.

M3PG - Mid-height unit with three deep pan drawers below a single oven. (Oven not included).

MYG - Mid-height unit with right or left opening door below a single oven. (Oven not included).

M2PH - Mid-height unit with two deep pan drawers below a double oven. (Oven not included).

MYH - Mid-height unit with right or left opening door below a double oven. (Oven not included).